IMA 30 Installation Mixing Amplifier
lnstallation Mixing Amplifier 35W @ 4 Ohms / 100 V / 70 V
Specifications
-Emergency input 1 balanced line input
-Mic/ line inputs 2
-Music sources 2 unbalanced stereo line inputs, Bluetooth 4.0
-Line outputs 1
-Powered outputs 1 with output mode selector (Low-Z/High-Z)
-Cooling Convection
-Priority levels 4
Emergency Input
-Nominal input sensitivity -6 dBu (Sine 1 kHz, Gain max)
-Nominal input clipping 20 dBu (Sine 1kHz)
-Connector 5-pin Terminal Block, pitch 5.08mm
Music inputs - CD/AUX
-Nominal input sensitivity CD/AUX - 6.22 dBV (Sine 1 kHz, Gain max)
-Nominal input clipping CD/AUX 7.78 dBV (Sine 1kHz)
-Connector CD/AUX 2 x dual RCA Mono Summed
Amplifier Output
-Amplifier Outputs High-Z: 70V or 100V outputs, Low-Z: 4 ohm minimum load
-Preamplifier input 5-pin Terminal Block, pitch 5.08mm
-RMS Power ( W ) 35 W (Continuous sine wave 1kHz, 4 ohm load)
-Power ( Peak ) (W) 39 W (100 msec sine 1kHz burst @ 4 ohm load)
-Frequency range 20 Hz - 20 kHz (LO-Z, -3 dB), 60 Hz - 20 kHz (HI-Z, -3 dB)
-Tone controlBass +/-10dB (100Hz)
-Tone control Treble +/-10dB (100Hz)
-Protection circuits Audio Limiter, over-current, short circuit, thermal overload
Aux Output
-Connector AUX-output 3-pin Terminal Block, pitch 5.08 mm
-Maximum gain 22 dB
General data
-Operating voltage 100 V AC - 240 V AC, 50 - 60 Hz
-Power consumption (max.) 70 W
-Idle power consumption 7 W (no signal input)
-Operating temperature ( non-condensing ) 0°C - 40°C; < 85% humidity, Non condensing
-Time to Auto-standby 20
-Dimensions (W x H x D) ( height with rubber feet )210 x 96.5 x 266.76 mm