Specification
-Rated Watts 2ch x 2 ohms 4750 watts 20ms repetitive burst / 3750 watts 1% THD both channels             driven @ 1kHz.
-Rated Watts 2ch x 4 ohms 2800 watts 20ms repetitive burst / 2450 watts 1% THD / 2020 watts 0.15%    THD, both channels driven @ 1kHz.
-Rated Watts 2ch x 8 ohms 1550 watts 20ms repetitive burst / 1425 watts 1% THD / 1200 watts 0.15%      THD, both channels driven @ 1kHz.
-Frequency Response 20Hz - 25kHz; +0dB, -3dB
-Crossover 100Hz switchable 2nd order high pass and 3rd low pass per channel
-Crosstalk > -85dB @ 1kHz @ 1000 watts power @ 8 ohms.
-Hum and Noise > -106dB, “A” weighted referenced to rated power @ 4 ohms
-Damping Factor (8 ohms) > 200:1 @ 20Hz - 1kHz @ 8 ohms
-Input Sensitivity 2.25 volts +/- 3% for 1kHz 4 ohm rated power, 2.195 volts +/- 3% for 1kHz 2 ohm          rated power
-Current Draw @ 1/8 in VA (watts) 2210 (1440) @ 2 ohms, 1550 (950) @ 4 ohms, 982 (560) @ 8 ohms
-Current Draw @ 1/3 in VA (watts) 4260 (3150) @ 2 ohm, 3120 (2160) @ 4 ohms, 1890 (1200) @ 8          ohms
-Idle Consumption 250VA, 120 watts.
-Controls 2 front panel attenuators, crossover select switch for HPF, Normal and LPF
-Indicator LEDs Five LED indicators per channel: Active, Signal, DDT, Temperature and DC
-Protection Thermal, DC, subsonic, incorrect loads, under and over voltage
-Connectors Inputs: Dual combination 1/4” XLR, Outputs: Dual 1/4” thru, one 2-pin & one 4 pin twist-    lock connector
-Construction 0.062” thick aluminum